New design 2835 Injection LED Lens Modules for channel letter
Specifications for 2835 SMD ABS Injection Samsung led module with
1.Lighting source: 2835 SMD LED
2. Quantity of LED: 3 PCS
3. Operating voltage: 12V DC
4. Wattage: 1.5 W
5. Dimension: 82*18 mm
6. Forward current: 130-150mA
7. Waterproof grade: IP67
8. Viewing angle: 120°
9. Color: Various colors are available
Features for 2835 SMD ABS Injection Samsung led module with lens
1. Wide applicability, easy to install and maintain
2. Extremely luminous, with wide viewing angle
3. Energy saving and environmental friendly
4. Various colors are available
5. Very bright and low power consumption
6. Long lifespan: More than 50, 000 hours.
This is new design smd2835 injection led module with lens , good
price for VIP customers.
|Color||WW, NW, PW, Red, Green, Blue|
|Max series connection Qty.||30 pcs|
|Product name||smd2835 led module with lens|
|Product Keywords||2835 Injection LED Lens Modules|
Application for 2835 SMD ABS Injection Samsung led module with lens
1. Idea for in cabaret, cabinet, furniture, landscape, and
2. Channel-letter backlights, signboard, sign and decoration, and
more high luminance efficiency and low power consumption
3. For cable and fixing hole
4. Channel letters backlighting
5. Advertisement signs acklighting
6. Advertisement light boxes backlighting
Installation Instruction for 2835 SMD ABS Injection Samsung led
module with lens
1. Main power cable dimension: should exceed 2x1.5mm². To prevent
damage from overheating caused by overload, the extended module
cable (if necessary) should adopt dimension above
0.75mm²/18#.,Cable length between power and module should not be
exceed 2m, if not it’ll suffer from power loss the total power
consumption will also increased.
2. Adopt method 1, the maximum is 20 PCS. (Don’t over-connecting).
3. Adopt method 2, the maximum is 25 PCS. (Don’t over-connecting).
4. Take off the adhesive tape from the back of modules, stick them
in the light box or advertisement board for initial settlement,
then fix the module by 2 piece of ST2.9x10 mm self tapping screws,
or you can also fix the module by glass glue.
5. The standard number is 20 pcs for each string; they also can be
cut off on customer’s requirement.
6. During the connection,using diagonal pliers to cut off power
cable between modules, peel off the plastic around 10mm, wiring the
cables and then connect them to their respective isolation port(the
white-red cable heads to positive,the white cable for negtive).Do
remember check the conductivity and reliablity of the cable after
the connection, genernally, they can’t be pulled out of the port by
7. If there are extra cable for the string-end module, peel off the
cable coat by 10mm (around)then connect then into isolation port.
8. To make sure that the waterproof and anti-corrosive reliability,
grease some silicon glue (neutral glass glue or waterproof glue.)
into the connection port for further protection.
9. Don’t touch the product when they are electrified.
10. Use reliable power driver that with certifications. (With short
circuit protection, overload protection and over-current
Packaging & Shipping
N.W: 18.57KG/CTN G.W: 19.65KG/CTN
Size for CTN: 40*38*28cm
Weight for CTN: 1.08KG.